Albert Lea Data Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== MythTV Topics ======

===== Typical Installation =====
  * Install mythbuntu from DVD
  * Enable the MythTV and Mythbuntu repositories in the Mythbuntu Control Center GUI
  * Run (as root):  ''apt update''
  * Run (as root):  ''apt upgrade''

===== Ubuntu FrontEnd =====
==== Samba Shares ====
<code>
//myth/recordings  /home/dvr/Videos/mythtv/tv  cifs  credentials=/home/dvr/etc/auth-myth.cifs,uid=1000,gid=127  0  0
//myth/videos  /home/dvr/Videos/mythtv/library  cifs  credentials=/home/dvr/etc/auth-myth.cifs,uid=1000,gid=127  0  0
//myth/music  /home/dvr/Music/mythtv  cifs  credentials=/home/dvr/etc/auth-myth.cifs,uid=1000,gid=127  0  0
//myth/pictures  /home/dvr/Pictures/mythtv  cifs  credentials=/home/dvr/etc/auth-myth.cifs,uid=1000,gid=127  0  0
</code>

===== Raspberry Pi FrontEnd =====
Visit [[https://www.mythtv.org/wiki/Raspberry_Pi|the MythTV RPi wiki area]] for more details \\
  * Set up some performance concerns in ''/boot/config.txt'': \\ <code>gpu_mem=256</code>
  * Disable wifi in ''/boot/config.txt'': <code>dtoverlay=pi3-disable-wifi</code>
  * Put CPU in performance mode (as root): <code>echo "performance" | tee /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor</code>
  * Turn off the screen saver: <code>xset s off</code>
  * Disable other energy star features: <code>xset -dpms</code>
  * Add PPA for Flirc (as root): <code>curl -sLS http://apt.flirc.tv/add | bash</code>
  * Ensure pulseaudio is disabled
  * Force audio to HDMI using the ''raspi-config'' command (as root)
  * Ensure audio is set to ''ALSA:default'' in mythfrontend's config section
  * Ensure volume is set to maximum and saved with ''alsamixer'' and ''alsactl store''
  * Set ''OpenMAX High Quality'' in video playback options, ensuring ''max CPUs'' is 4
  * The "Advanced" de-interlacing won't work with OpenMAX, so adjust accordingly

===== Trivia =====

==== Display Re-Activation ====
For some combinations of hardware and software versions, the display that MythTV is using can become "deactivated", usually due to the actual hardware display being switched to another input (as is common for TVs, switching to a different HDMI port, etc...).

To reactivate a display:
<code>
#!/bin/bash
SDN=":0"
VDN="HDMI2"
xrandr -d ${SDN} --output ${VDN} --auto
</code>

... you might have to find the values for ''SDN'' and ''VDN'' from ''.config/xfce4/xfconf/xfce-perchannel-xml/displays.xml''

==== Execute script at boot ====
Here's a sample script to put at ''/etc/init.d/YourScriptName'':<code>
#!/bin/sh
# /etc/init.d/mythdvr
### BEGIN INIT INFO
# Provides:          mythdvr
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: MythTV frontend boot steps
# Description:       MythTV frontend boot steps
### END INIT INTO

echo "performance" | tee /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
/usr/sbin/alsactl restore

case "$1" in
  start)
    echo "Starting mythdvr"
  ;;
  stop)
    echo "Stopping mythdvr"
  ;;
  *)
    echo "Usage: /etc/init.d/mythdvr {start|stop}"
    exit 1
  ;;
esac
exit 0
</code>
Run this to register the script:<code>update-rc.d YourScriptName defaults</code>
Run this to un-register the script:<code>update-rc.d YourScriptName remove</code>

 \\

// [[tech:start|Technical Information Repository]] // \\
Albert Lea Data Wiki

User Tools

Site Tools

Page Tools
