Albert Lea Data Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<typo fs:xx-large; fw:bold>Solaris Topics</typo>

[[https://docs.oracle.com/cd/E22985_01|Oracle SPARC T4 page]] \\
{{tech:unix:solaris:e22992.pdf|SPARC T4 Getting Started Guide (PDF)}} \\
{{tech:unix:solaris:e22988.pdf|SPARC T4 Server Installation Guide (PDF)}} \\

====== Installation & Configuration ======
==== Serial Console ====
  * Use the ''minicom -D /dev/devicename'' command from Linux //(''/dev/ttyUSB0'')//
  * Serial configuration:  ''9600 8-N-1''
  * At the ''->'' prompt, ''start /SYS'' starts ILOM, ''start /HOST/console'' starts pre-boot console
  * At the ''{0} ok'' prompt, typically the ''boot'' command should work
  * Use ''probe-scsi-all'' to list all disk info
  * The ''printenv boot-device'' command shows current boot setting
  * May have to use the ''setenv boot-device newbootdevspec'' command to change boot device

==== DNS (client) ====

Prepare a list of domains to search and the IP addresses of the DNS name servers on your network.
Set properties in the SMF repository with the information:<code>
$ svccfg -s network/dns/client
svc:/network/dns/client> setprop config/search = astring: ("domain1" "domain2")
svc:/network/dns/client> setprop config/nameserver = net_address: (address1 address2)
svc:/network/dns/client> select network/dns/client:default
svc:/network/dns/client:default> refresh
svc:/network/dns/client:default> validate</code>
Specify the name service switch to use DNS:<code>
svc:/network/dns/client:default> select name-service/switch
svc:/system/name-service/switch> setprop config/host = astring: "files dns"
svc:/system/name-service/switch> select system/name-service/switch:default
svc:/system/name-service/switch:default> refresh
svc:/system/name-service/switch:default> validate
svc:/system/name-service/switch:default> quit</code>
Start the services that are needed to run the DNS client:<code>
$ svcadm enable dns/client
$ svcadm enable name-service/switch</code>

====== Trivia ======
=== Change hostname ===
<code>svccfg -s system/identity:node setprop config/nodename="newhostname"
svcadm refresh system/identity:node
svcadm restart system/identity:node</code>


==== Sample output ... ====
<WRAP prewrap><code>
{0} ok probe-scsi-all
/pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
  Unit 0   Removable Read Only device    AMI     Virtual CDROM   1.00

/pci@400/pci@2/pci@0/pci@4/scsi@0

FCode Version 1.00.64, MPT Version 2.00, Firmware Version 9.00.00.00

Target 9 
  Unit 0   Disk   HITACHI  H103030SCSUN300G A2A8    585937500 Blocks, 300 GB
  SASDeviceName 5000cca00a83c874  SASAddress 5000cca00a83c875  PhyNum 2 
Target a 
  Unit 0   Removable Read Only device   TEAC     DV-W28SS-V       1.0B
  SATA device  PhyNum 6 
Target b 
  Unit 0   Disk   ATA      ST9500620NS      SN01    976773168 Blocks, 500 GB
  SATAWorldWideName 5000c5002e5a1b90  PhyNum 3 

/pci@400/pci@1/pci@0/pci@4/scsi@0

FCode Version 1.00.64, MPT Version 2.00, Firmware Version 9.00.00.00
</code></WRAP>
Albert Lea Data Wiki

User Tools

Site Tools

Page Tools
